DIY Sticker/Label

What you'll need for your sticker:
1. Water
2. Clear packaging tape or book tape

  Directions:
1. Get a piece of paper with ink. The type of ink cannot be from a pen or a maker. In this case, I used a book page.

2. Take your tape and cover the paper.

3. Press the paper. The more you do it, the better the ink will stay. I used a gluestick.

4. Get a cup filled with water and dunk the paper into the cup. Wait for at least 5 minutes.

5. Rub the back of the paper until it is completely gone, leaving only the ink. I prefer rubbing the paper under the water, so it's easier.

6. Now you have your sticker.

  Well I hope you enjoyed this DIY that wasted about 8 minutes of your life.


  - Rhild Rhants